Manual: Assembly of Bottle Holder on Walker 12er size S

Place of assembly of the bottle holder (R or L). 1 Place of assembly of the bottle holder (R or L).

 

Wrap the strap around the frame tube and pull it through the holder. 2 Wrap the strap around the frame tube and pull it through the holder.

Pull the strap tight and turn the nut clockwise to tighten the strap. 3 Pull the strap tight and turn the nut clockwise to tighten the strap.

 

Cut the excessive strap off. 4 Cut the excessive strap off.

 

Mount the second holder in the same way. 5 Mount the second holder in the same way.

 

The two holders correctly assembled on the frame tube. 6 The two holders correctly assembled on the frame tube.

 

Attach the bottle holder with the two screws. The “opening“ of the bottle holder should face outwards. 7 Attach the bottle holder with the two screws. The “opening“ of the bottle holder should face outwards.

 

The bottle holder is now attached to the frame and you enter the bottle from the side and remove it outwards. 8 The bottle holder is now attached to the frame and you enter the bottle from the side and remove it outwards.

 

Product Reviews    

  • The neighbors all love it…

    The Rollator arrived in perfect condition, all I had to do was take it out of the box and start using it. It meets all of my expectations, the neighbors all love it. John…

  • Veloped Trek Large 14 inch…

    I received my Veloped Trek Large 14-inch on Friday, 22/12, 2023, which is perfect for me. Ideal height, too. I can walk upright with it compared to my previous walker. On my doctor's advice, I will go out for long walks with it every day in the Sprin…

  • Wheel hub cap…

    Easy to order, everything worked out great…

  • OVER THE MOON…

    I was cautious to buy due to the price. I tried others in the shop (UK) and was appalled by the wobbly feelings they induce in me.

    I wanted something stable, easy to take on the UK (stagecoach) buses and would accommodate my arthritic Pomeranian.…

  • I have waited to write this review as i wanted to experience my husband using it for a few weeks. We are absolutely delighted with it. my husband, once an active even hyperactive runner, cyclist and mountain climber is now quite disabled. he was unab…

  • Recommended…

    My used Veloped has a non-original wheel. This wheel has a broken valve. I ordered an original tube and replaced it myself. I've never done that before; I'm 68 years old, and I did it alone. I was very proud of myself.…

  • Excellent walker…

    Lovely walker, beautifully made. Wonderful for going up and down kerbs. Try to persevere with it but need an armrest walker to take some of the weight off my legs due to MS. I was advised you didn't do these but wanted a walker I could use on roug…

  • My new Trionic walking partner…

    I had read positive reviews on the Trionic Sports Veloped after research on a suitable walking aid. I have been using Norwegian walking poles but my osteoporosis and arthritis were limiting my walking. I ordered one through Mobility Smart in Preston …

  • My Fabulous Veloped…

    I purchased my Veloped 14er in May and have found it to be a great product. The shipping was quick, the packaging sturdy and protective, and the Veloped came ready to go! I named her Vera.

    Since the first day, the Veloped has transformed my life. …

Subscribe to our newsletter!