Length adjustment of front QR-axle

Make sure it is correctly adjusted for safety reasons!

Length adjustment of front QR-axle - 1

1. Loosen the 2 allen-key screws, and push the QR-axle down through the fork until the big axle nut is visible.

Length adjustment of front QR-axle - 2

2. Adjust the length of the QR-axle with 11 mm and 19 mm spanners. Keep the QR-axle from rotating by holding it at its end with the 11 mm spanner. Adjust the nut with the 19 mm spanner. If the axle doesn’t lock into the frame, screwing the nut ¼-1/2 a turn anti-clockwise is sufficient.

3. Tighten the 2 fork screws again, in order to fix the QR-axle to the fork, and try attaching the front suspension to the frame. Confirm that it’s fully locked in place.

Product Reviews    

  • The best walker I've ever found.…

    My Walker is a high-quality product, which is very well thought out and easy to handle. Its robust appearance makes it seem very heavy, yet the opposite is true and one notices then that the construction is made of aluminium and is therefore very lig…

  • Very good product, expectations fulfilled!…

    Hans-Peter Böttcher, born 1950.
    I was researching walking aids online and came across the TRIONIC products.
    Since I am very active, being out in nature a lot and also want to continue to do so. Therefore, I chose the VELOPED. I am very satisfied wi…

  • Absolutely Marvelous…

    My Trionic Trek helps me travel to places on-and-off sidewalks, roads, and trails. Even in deep snow. I am especially fond of knowing that I have the absolute freedom of walking alone ANYWHERE within a ten-mile radius of my home (during the long dayl…

  • Mr Alan Clarke…

    Walking is a prime requirement for good health, even when you have a disability. The Trionic Walker 12er is allowing me to traverse walkable surfaces with ease, a situation that my previous, very good-quality walker, could not achieve.…

  • Works wonderfully…

    I am writing this review for my 95-year-old mother.
    The Walker has significantly increased her mobility. Previously, she had considerable problems with the old cobblestones and unpaved paths in Lübeck. Now with her Walker, she can visit us again. T…

  • Improved quality of life…

    Since my severely disabled sister (spasticity) started using the Trionic Walker 12", sudden wheel locks on the numerous uneven road surfaces, as well as on sandy and grassy areas, are a thing of the past. It's safer for her and a great comfort for us…

  • Finally…

    The Veloped allows me to go out again.
    It is stable and has maximum off-road mobility. Very important for me is the possibility to rest now and then.
    I would definitely buy it again.
    The cane holder is very practical.…

  • Based on excellent experiences with the Veloped and the Walker…

    Based on my excellent experience with the Veloped, I also bought the Walker for my mother to use in the city. So far, my mother is completely satisfied with both mobility aids. Both walkers are robust, well-designed and make a very good impression.

  • I feel safer and more independent!…

    I love my Veloped! I continue to go hiking and camping with my club (SCA). I can't hike like I did when I was younger but at least I can go farther with the Veloped on a reasonable trail. Never fails to move smoothly over rocks and bumpy ground.. …

    Veloped Sport 12er M black/white/white
    by Cynthia Allen-O'Sullivan

Subscribe to our newsletter!

"> ?>