Rollator LED Front Light 1600 Lumen with Battery Pack

Improve your rollator with the powerful 1600 Lumen LED head light, designed to light up your path.

SKU: 11-90-033
GTIN: 7350038033727
Stock Status: In Stock
Delivery Status: 3-5 working days
83.19 €
Including Tax: 0 € (0%)
pcs

Simple and secure payment with your Paypal account or with card.
Mastercard is a smarter and secure way to make online payments.
Visa is the largest global card network in the world by transaction value, ubiquitous worldwide.
Accepted in more than 130 countries, and with over 100 million cards in use, American Express (Amex), is a key payment method worldwide.
Klarna Pay in 3
?php echo functions::escape_html(strip_tags(language::translate('pm_mollie:sepa:description', ''))); ?>
You receive the banking details after you have confirmed your order.

Rollator LED Front Light 1600 Lumen with Rechargeable Battery Pack

Purpose:         To see
Light power:   1600 Lumen

Enhance your rollator with the powerful 1600 Lumen LED Headlight, designed to light your path precisely and efficiently. Equipped with an advanced anti-glare lens design, this headlight ensures maximum visibility without causing discomfort to others. Whether navigating in low-light conditions or complete darkness, its multiple lighting modes (25%, 50%, 100%, and flash) allow you to adjust brightness according to your needs.

This high-performance light features 2 Samsung LH351D LEDs, delivering up to 1600 lumens while operating within a 5V to 15V DC voltage range. It also includes a built-in thermostat chip that prevents overheating, ensuring safe and consistent performance.

Accessories include an GoPro bracket, an aluminum light holder, and all necessary nuts and screws for easy installation. With a generous 130cm cable length and an IP65 waterproof rating, this headlight is built to handle outdoor conditions confidently.

Illuminate your journey with this durable, high-lumen headlight, and enjoy enhanced safety on every adventure.

Max power: 1600 Lumen
Voltage: 5V-15V DC
LED type: 2*Samsung LH351D LED
Mode: 25%-50%-100%-flash
Accessories: GoPro bracket + Aluminum light holder and nuts and screws
Cable length: 130CM
Waterproof level: IP65
Battery pack: 7.4V/5000mAh 37Wh waterproof with digital power display
Shipping Procedure: UN3481 - Lithium-ion batteries in compliance with Section II of PI966”.
Steady modes (one click): 25%(400LM, 14h) / 50%(800LM, 7h) /100% (1600LM, 3.5h)
Power Indicator: When the input voltage is less than 6.5V, the power indicator shows red. But, it doesn't mean your battery is low voltage if the input voltage for the light is set to 6V or less.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

1600 Lumen Trionic LED Front Light with Battery Pack

This manual both shows how you attach the light holder and the light on a Walker (left column below) and also how you attach them on a Veloped (right column below).

In the left-hand photo, A shows the holder attachment parts for a Walker (2 screws + 2 washers). B shows the holder attachment parts for a Veloped (1 screw + 1 knurled nut + 1 nut).

1600 Lumen Trionic LED Front Light with Battery Pack

Attaching the Light Holder

Instructions for a Walker

On top of the black semi-vertical tube, locate the two screws that clamp the grip tube, situated in front of the brake lever.
A1. On top of the black semi-vertical tube, locate the two screws that clamp the grip tube, situated in front of the brake lever.
Loosen both screws with the 5mm allen key included with the LED light.
A2. Loosen both screws with the 5mm allen key included with the LED light.
Remove the two screws from the grip clamp.
A3. Remove the two screws from the grip clamp.
Place the light holder on top of the grip clamp, with its circular and slotted light attachment pointing forwards and upwards. Enter the two screws with washers into the holes of the clamp.
A4. Place the light holder on top of the grip clamp, with its circular and slotted light attachment pointing forwards and upwards. Enter the two screws with washers into the holes of the clamp.
Tighten the two screws with the 5mm allen key. NOTE: It is important that you tighten the screws properly as they secure the grip tube with its rubber grip and brake lever.
A5. Tighten the two screws with the 5mm allen key. NOTE: It is important that you tighten the screws properly as they secure the grip tube with its rubber grip and brake lever.

Instructions for a Veloped

Locate the screw at the center folding hinge of the U-shaped grip bar of the Veloped. Unscrew the screw with the included 4mm allen key and remove it.
A1. Locate the screw at the center folding hinge of the U-shaped grip bar of the Veloped. Unscrew the screw with the included 4mm allen key and remove it.
Replace the old screw with the longer screw included with the LED light. Attach the longer screw to the hinge and tighten it with the 4mm allen key.
B2. Replace the old screw with the longer screw included with the LED light. Attach the longer screw to the hinge and tighten it with the 4mm allen key.
Attach the short angled end of the light holder to the lower end of the screw, on the downside of the grip bar. Fasten the holder with one washer and the knurled nut.
B3. Attach the short angled end of the light holder to the lower end of the screw, on the downside of the grip bar. Fasten the holder with one washer and the knurled nut.
For a more secure holder attachment, avoiding the holder to unintentionally turn sideways, replace the knurled nut with the included stainless steel nut and tighten it with a 10mm spanner.
B4. For a more secure holder attachment, avoiding the holder to unintentionally turn sideways, replace the knurled nut with the included stainless steel nut and tighten it with a 10mm spanner.
This photo shows the light holder as correctly attached.
B5. This photo shows the light holder as correctly attached.

Attaching the LED Light to the Holder

Instructions for a Walker

Identify the circular front end of the light holder, with two slots for attaching the light.
A6. Identify the circular front end of the light holder, with two slots for attaching the light.
Push the slotted bracket of the light into the slots of the holder and make sure they are aligned. Seen in the traveling direction of the Walker, enter the included wingnut from the left and tighten it.
A7. Push the slotted bracket of the light into the slots of the holder and make sure they are aligned. Seen in the traveling direction of the Walker, enter the included wingnut from the left and tighten it.

Instructions for a Veloped

Locate the screw at the center folding hinge of the U-shaped grip bar of the Veloped. Unscrew the screw with the included 4mm allen key and remove it.
B6. Locate the screw at the center folding hinge of the U-shaped grip bar of the Veloped. Unscrew the screw with the included 4mm allen key and remove it.
Identify the circular front end of the light holder, with two slots for attaching the light.
B7. Identify the circular front end of the light holder, with two slots for attaching the light.

Placing the Battery Pack

Instructions for a Walker

Run the longer extension cable along the semi-vertical grip tube of the Walker and secure it with the included velcro strap.
A8. Run the longer extension cable along the semi-vertical grip tube of the Walker and secure it with the included velcro strap.
You can cut the excessive length of the velcro strap with a pair of scissors.
A9. You can cut the excessive length of the velcro strap with a pair of scissors.
Place the battery pack in the rear zippered pocket of the basket.
A10. Place the battery pack in the rear zippered pocket of the basket.

Instructions for a Veloped

Run the longer extension cable along the U-shaped grip bar of the Veloped and secure it with the included velcro strap.
B8. Run the longer extension cable along the U-shaped grip bar of the Veloped and secure it with the included velcro strap.
You can cut the excessive length of the velcro strap with a pair of scissors.
B9. You can cut the excessive length of the velcro strap with a pair of scissors.
Place the battery pack in the rear zippered pocket of the basket.
B10. Place the battery pack in the rear zippered pocket of the basket.

The package contains

The package contains

How to operate the light

How to operate the light

Customer Reviews

Be the first to post a review for this product

General FAQ

Relevant Guides

Search help

Also Purchased Products

Veloped Bottle Holder

Veloped Bottle Holder

10.08 €
Multi-Function Pump

Multi-Function Pump

28.57 €
Veloped Rain Cover

Veloped Rain Cover

11.76 €
Veloped Cane Holder

Veloped Cane Holder

8.40 €
Wire Lock

Wire Lock

11.76 €
Veloped Storage Rain Cover

Veloped Storage Rain Cover

23.53 €

Product Reviews    

  • 11 17

    S U P E R !…

    The shipping and the delivery of our Veloped Trek M 14er was completed in 3 days!
    So, it was very fast!

    Our Veloped was carefully packed and, when we unpacked it, was not damaged! We did not have any problems with the assembly either! See video a…

    Read the Full Review 
    Trionic
    Veloped Trek 14er M green/black/orange
    by Katrin Seifert
  • 0 0

    Expectation fully met…

    After the expected prompt delivery, there was an initial problem with one of the two brakes. We received a precise description of how to remedy the problem by phone and email. Since then, see above.…

    Rollator Walker 9er black/black/gray
    by Gerhard Kuchenbuch
  • 17 7

    Love it!…

    I already own a Veloped that I bought second-hand and use daily at our local country park so know how good the quality is and how useful they are. I wanted a smaller walker that would fit in the footwell of the car with the seat flipped up so I can t…

    Read the Full Review 
    Rollator Walker 14er M/L black/black/gray
    by Carol Parry
  • 21 10

    Easy rider…

    Sir, since the purchase of the above walker my wife has found she has less bother getting around, and no back and shoulder pain, after a days shopping. Glides easily over imperfections in footways and footpaths. I can not express how happy it makes m…

    Read the Full Review 
    Rollator Walker 12er M/L navy/black/red
    by David Goodfellow
  • 10 0

    We are very satisfied - the Veloped is very safe to use and solidly buil…

    The Veloped is a great relief, especially on the cobblestone streets of the historical city centre.…

    Veloped Tour 14er M black/reflex/red
    by Andreas Woitassek
  • 8 6

    v…

    I am very pleased with the Veloped Sport; it has helped my walking and my back a lot. It is heavier than I had expected especially pushing it uphill. However, at 90, it has given me a new lease of life.…

    Trionic
    Veloped Sport 12er M navy/red/white
    by Monica Hillman
  • 8 0

    Anne Mears…

    I love the fact that I can walk in the countryside again and not be fazed by rough terrains like large gravel, grass paths and uneven surfaces. It means I can get away from cars and houses and surround myself with greenery. This lifts my spirits and …

    Read the Full Review 
    Rollator Walker 12er Size S Red w. black/black/grey
    by Anne Mears
  • 15 10

    I’m thrilled with this!…

    Transformed my life! Yes, I did get out before but was very unsteady and was always concerned that I might need to sit down and there was nowhere to sit (unfortunately I can’t sit on the ground!). Now I no longer have these concerns! My confidence ha…

    Read the Full Review 
    Trionic
    Veloped Trek 12er M navy/black/yellow
    by Sue Bate
  • 9 5

    A very stable rollator…

    Thanks to its large pneumatic tyres, the Walker helps me to get easily over the cobblestones on the streets and pavements in my neighbourhood, Niederschönhausen (Berlin-Pankow). And other unevenness are also well cushioned.

    Finally a rollator for…

    Read the Full Review 
    Rollator Walker 14er M/L green/black/red
    by Joachim Hoffmann

Subscribe to our newsletter!