Single-Hand Brake LEFT

One-hand braking system for the Veloped/Walker, where both brakes (R+L) are operated with the left hand by a single brake lever.

SKU: 11-90-016
Stock Status: In Stock
Region: Available
(Item does not ship from the EU to Australia, Canada, or the USA.)
Delivery Status: 3-5 working days
50.42 €
Including Tax: 0 € (0%)
pcs

Get your personalised quote
Tell us what you need, and we’ll send you a personalized quote.
Request a Quote
Receive Your Quote
No obligation • We typically reply within 24 hours
Fast response
No credit card required
Free quote
The One Hand Brake for the left hand on the Trionic Veloped and Walker rollator, when installed, allows you to control the rollator's brakes with one hand. 
  • Brake lever with linear adapter that splits the single brake cable into two.
  • Both brakes (R+L) are operated with one single brake lever.
  • For left side assembly.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

Trionic Single-Hand Brake

One-hand brake that brakes the right and left brakes simultaneously.

Assembly: Trionic single-hand brake system (pictures show Right side) 1 Assembly: Trionic single-hand brake system (pictures show Right side)

1. Mount the brake lever on the gripbar (as far to the front as possible).

2. Unscrew the screws (2x 4 pcs) that attach the R & L brake cover.

3. Attach the short brake cable to the brake on the same side as the brake lever.

4. Make sure that the cable-end nipple screw is facing outwards (wheel-direction).

5. Route the longer brake cable through the frame (betw. top & down frame tube).

6. Attach the longer brake cable to the brake positioned on the opposite side of the brake lever.

7. Cut a small hole (2x) through the fabric of the basket at each rear bottom corner (see RED circles in the picture).

8. Fasten the longer brake cable to the basket with the 2 cable-ties.

9. Re-attach the 2 brake covers again, using the 2 cable-ties with a Ø5 mm hole for the 2 upper screws (R + L side).

10. Stick one of the wheel QR-axles (Ø12 mm) through the cable-tie loop, and pull the cable-tie tight around the axle (provides the correct tension in order to avoid that the cable rubs against the tire, but without the brake cable being forced out of direction).

11. The R & L side brake cables can be individually adjusted, by using either the adjuster screws positioned at the brake, or the adjuster screws attached to the linear duplicator.

12. Make sure that the parking brake blocks the wheel completely.

Centering of the brake 2 Centering of the brake

1. Unscrew the brake collar screw 3-4 turns (reached through the brake cover hole).

2. Pull the brake lever and hold it tight.

3. While holding the brake lever tight, fasten the brake collar screw again.

4. Check that the wheel spins freely, without rubbing between brake/brake hub.

If you have any questions, please do not hesitate to contact our product manager Stefan Kindberg; +46-8-522 100 52.

Customer Reviews

Monika Römer
Left single-hand brake and handling
It skews to one side when braking, especially on sloping roads.

I have trouble getting over old town pavements with kerbs.

General FAQ

Relevant Guides

Search help

Also Purchased Products

Product Reviews    

  • Trionic Walker…

    We are delighted with the 12er S Walker. Well designed and beautifully made. The 4 wheels with linked steering give great stability yet have good maneuverability. We originally intended to buy the 14er with even bigger wheels as our drive has some de…

  • All round brilliant machine and super efficient people to advise.…

    The Trionic 14er has made such a difference to my life. I pulled it out of the box and set off for a walk: down the slab path, and shallow steps, over the rough gravel drive, along the road and back to my door. The Trionic 14er is effortless to move.…

  • These walkers are reliable...…

    These walkers are reliable and provide stability and support during walking.

    They are robust and easy to manoeuvre, making them an excellent mobility aid.…

  • A really great product…

    A stable and modern walking aid, could just as well be used by younger people with or without mobility issues. Works very well on ice and some snow. For us with lots of snow during winter, you might imagine putting skis under the wheels, or using the…

  • FANTASTIC!!…

    I purchased the Veloped because I have significant issues with balance and instability in my knees due to arthritis that result in a high risk for falling. These issues had severely limited me from outdoor activities like going to the beach just enjo…

  • Regained Freedom…

    Very strong workmanship. Easy removal of the wheels for transport in the car. The basket is practical for jacket, dog leash etc. The height adjustment of the handles is very easy. The curved handrail is very useful for going uphill. Tested over roots…

  • Walker…

    I love my new walker. It is great going over grassy and rocky areas.
    The only issue that I have is when I put it into the back of my Subaru Impreza. It is somewhat hard to put it in and lay it down. Any suggestions?…

  • Veloped Trek Large 14 inch…

    I received my Veloped Trek Large 14-inch on Friday, 22/12, 2023, which is perfect for me. Ideal height, too. I can walk upright with it compared to my previous walker. On my doctor's advice, I will go out for long walks with it every day in the Sprin…

  • The walker12 is a great product in……

    The walker12 is a great product in every aspect,top quality build quality,lightweight aluminium frame,comfortable grips,quick release wheels for compact storage.

    The walker12 has greatly improved my mobility and I am now enjoying daily walks with …

Subscribe to our newsletter!

"> ?>