Single-Hand Brake LEFT

One-hand braking system for the Veloped/Walker, where both brakes (R+L) are operated with the left hand by a single brake lever.

SKU: 11-90-016
Stock Status: In Stock
Region: Available
(Item does not ship from the EU to Australia, Canada, or the USA.)
Delivery Status: 3-5 working days
50.42 €
Including Tax: 0 € (0%)
pcs

Get your personalised quote
Tell us what you need, and we’ll send you a personalized quote.
Request a Quote
Receive Your Quote
No obligation • We typically reply within 24 hours
Fast response
No credit card required
Free quote
The One Hand Brake for the left hand on the Trionic Veloped and Walker rollator, when installed, allows you to control the rollator's brakes with one hand. 
  • Brake lever with linear adapter that splits the single brake cable into two.
  • Both brakes (R+L) are operated with one single brake lever.
  • For left side assembly.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

Trionic Single-Hand Brake

One-hand brake that brakes the right and left brakes simultaneously.

Assembly: Trionic single-hand brake system (pictures show Right side) 1 Assembly: Trionic single-hand brake system (pictures show Right side)

1. Mount the brake lever on the gripbar (as far to the front as possible).

2. Unscrew the screws (2x 4 pcs) that attach the R & L brake cover.

3. Attach the short brake cable to the brake on the same side as the brake lever.

4. Make sure that the cable-end nipple screw is facing outwards (wheel-direction).

5. Route the longer brake cable through the frame (betw. top & down frame tube).

6. Attach the longer brake cable to the brake positioned on the opposite side of the brake lever.

7. Cut a small hole (2x) through the fabric of the basket at each rear bottom corner (see RED circles in the picture).

8. Fasten the longer brake cable to the basket with the 2 cable-ties.

9. Re-attach the 2 brake covers again, using the 2 cable-ties with a Ø5 mm hole for the 2 upper screws (R + L side).

10. Stick one of the wheel QR-axles (Ø12 mm) through the cable-tie loop, and pull the cable-tie tight around the axle (provides the correct tension in order to avoid that the cable rubs against the tire, but without the brake cable being forced out of direction).

11. The R & L side brake cables can be individually adjusted, by using either the adjuster screws positioned at the brake, or the adjuster screws attached to the linear duplicator.

12. Make sure that the parking brake blocks the wheel completely.

Centering of the brake 2 Centering of the brake

1. Unscrew the brake collar screw 3-4 turns (reached through the brake cover hole).

2. Pull the brake lever and hold it tight.

3. While holding the brake lever tight, fasten the brake collar screw again.

4. Check that the wheel spins freely, without rubbing between brake/brake hub.

If you have any questions, please do not hesitate to contact our product manager Stefan Kindberg; +46-8-522 100 52.

Customer Reviews

Monika Römer
Left single-hand brake and handling
It skews to one side when braking, especially on sloping roads.

I have trouble getting over old town pavements with kerbs.

General FAQ

Relevant Guides

Search help

Also Purchased Products

Product Reviews    

  • Veloped Sport 14er M…

    I do enjoy my Trionic Veloped. However, I think the seat depth could be improved by making the rear verticals slightly further back (which would probably involve major costs!). Also, I do not find the front wheel combination very helpful and have con…

  • Walker 14 Simply great…

    After 10 years on a Veloped, I have now switched to the Walker. It's easier to transport in the car. As expected, it was a very good decision, I can go anywhere with it, whether on cobblestones, fields or forest paths, it's pure joy! I'll still be u…

  • I have been meaning to write for some time to thank you!…

    I have been meaning to write for some time to thank you for all the help my Veloped gives me - I use it for hanging out the washing and fetching peat from the shed as well as walking on the mostly rough terrain here on the Isle of Barra in the Wester…

  • Trionic Veloped – it's changed my life…

    I received my Trionic Veloped Tour at the end of September. I am so glad that I've got it.

    I used a walker before but even with that, I was loath to go for a walk and would find lots of reasons why I shouldn't go. All that has changed now with my …

  • I am happy…

    I am still practising. It works quite well on both paved and unpaved paths. I'm happy to have it, because it is safe.…

  • Great product…

    Bought this after I had a bad fall and lost my confidence. With this Walker, I feel safe and secure from losing my balance. I am 5 ft tall, so the 12er size S is ideal for me. Best decision I ever made, was to purchase this. The seat is great if you …

  • Great walking aid.…

    Very good build quality. Smart and cool looking.
    The difference between my old rollator is amazing.
    I am glad I took the plunge and paid the required to obtain the Tour.…

  • Excellent…

    Everything we experienced with Trionic was excellent. The pre-sales advice, the ordering process, communications, delivery and (of course) the product. It's superbly engineered and easily assembled. More than that. it works, we have tried other walke…

  • Excellent experience of Trionic and the Veloped Trek…

    I have recently purchased a Veloped Trek directly from Trionic and have been delighted with the process and the product. Stefan at Trionic kept me updated about the shipping timescales, and the Veloped arrived on time, with full, clear, and easy to f…

Subscribe to our newsletter!

"> ?>