Single-Hand Brake RIGHT

One-hand braking system for the Veloped/Walker. Both brakes (R+L) are operated with the right hand using a single brake lever. For right-hand mounting.

SKU: 11-90-015
Stock Status: In Stock
Region: Available
(Item does not ship from the EU to Australia, Canada, or the USA.)
Delivery Status: 3-5 working days
50.42 €
Including Tax: 0 € (0%)
pcs

Get your personalised quote
Tell us what you need, and we’ll send you a personalized quote.
Request a Quote
Receive Your Quote
No obligation • We typically reply within 24 hours
Fast response
No credit card required
Free quote
The One Hand Brake for the right hand on the Trionic Veloped and Walker rollator, when installed, allows you to control the rollator's brakes with one hand. 
  • Brake lever with linear adapter that splits the single brake cable into two.
  • Both brakes (R+L) are operated with one single brake lever.
  • For right side assembly.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

Trionic Single-Hand Brake

One-hand brake that brakes the right and left brakes simultaneously.

Assembly: Trionic single-hand brake system (pictures show Right side) 1 Assembly: Trionic single-hand brake system (pictures show Right side)

1. Mount the brake lever on the gripbar (as far to the front as possible).

2. Unscrew the screws (2x 4 pcs) that attach the R & L brake cover.

3. Attach the short brake cable to the brake on the same side as the brake lever.

4. Make sure that the cable-end nipple screw is facing outwards (wheel-direction).

5. Route the longer brake cable through the frame (betw. top & down frame tube).

6. Attach the longer brake cable to the brake positioned on the opposite side of the brake lever.

7. Cut a small hole (2x) through the fabric of the basket at each rear bottom corner (see RED circles in the picture).

8. Fasten the longer brake cable to the basket with the 2 cable-ties.

9. Re-attach the 2 brake covers again, using the 2 cable-ties with a Ø5 mm hole for the 2 upper screws (R + L side).

10. Stick one of the wheel QR-axles (Ø12 mm) through the cable-tie loop, and pull the cable-tie tight around the axle (provides the correct tension in order to avoid that the cable rubs against the tire, but without the brake cable being forced out of direction).

11. The R & L side brake cables can be individually adjusted, by using either the adjuster screws positioned at the brake, or the adjuster screws attached to the linear duplicator.

12. Make sure that the parking brake blocks the wheel completely.

Centering of the brake 2 Centering of the brake

1. Unscrew the brake collar screw 3-4 turns (reached through the brake cover hole).

2. Pull the brake lever and hold it tight.

3. While holding the brake lever tight, fasten the brake collar screw again.

4. Check that the wheel spins freely, without rubbing between brake/brake hub.

If you have any questions, please do not hesitate to contact our product manager Stefan Kindberg; +46-8-522 100 52.

Customer Reviews

Bobby Huskey
Didn’t last long
This is broken already after only a couple of months of use
John Cluny
Single-Hand Brake
Brake works very well but it was not easy to fit, and the cross-cable tends to interfere with the forward sliding of the seat.
Dennis Roberts
Brake lever adapter / converter
Contact was easy, courteous and helpful.
Delivery was quick and straightforward and the part fitted as expected.

General FAQ

Relevant Guides

Search help

Also Purchased Products

Product Reviews    

  • Great walker! Trionic is the brand I recommend!!…

    I’ve been using my walker since June 2025 and it has helped immensely. It is a workhorse! I can take it across lawns, curbs and gravel without hesitation that stopped my two former walkers cold. There is no better feeling than to SIT safely and comf…

  • Out on a snowy day!…

    The Trionic veloped is excellent in the snow.
    We had a good coverage of snow in Berkshire today. I was able to walk to work with support of the Trionic Veloped.…

  • My new Trionic walking partner…

    I had read positive reviews on the Trionic Sports Veloped after research on a suitable walking aid. I have been using Norwegian walking poles but my osteoporosis and arthritis were limiting my walking. I ordered one through Mobility Smart in Preston …

  • Personal aid and fast delivery. My best INVESTMENT…

    Praise to you who invented the Veloped!
    I have COPD FEV1 23%, and thanks to the Veloped I can get out in the forest to pick mushrooms and blueberries. Walked several running tracks. Had sore muscles in the hips in the beginning. Because it's so easy…

  • Walker…

    I love my new walker. It is great going over grassy and rocky areas.
    The only issue that I have is when I put it into the back of my Subaru Impreza. It is somewhat hard to put it in and lay it down. Any suggestions?…

  • New lease on life…

    My Veloped has given me a new lease on life! It’s so much safer and easier than using my walker, and allows me to navigate all kinds of terrain too, including trails. I feel comfortable being more independent and also never worry about getting stuck …

  • If You Walk in the Dark – You Need These…

    I usually walk along the road in the dark evenings, so what better idea than to buy these led front lights?…

  • A WONDERFUL PURCHASE…

    In common with one of your other reviewers, I suffer from peripheral neuropathy, resulting in a severe loss of sense of balance. Since the delivery of the Walker 12er several weeks ago my life has improved immensely. I now find that walking, which I …

  • Excellent quality…

    Walker has proved an excellent investment allowing my wife more freedom and confidence walking outside.
    Sturdy construction although a little heavier than most competitors.…

Subscribe to our newsletter!

"> ?>