Single-Hand Brake RIGHT

One-hand braking system for the Veloped/Walker. Both brakes (R+L) are operated with the right hand using a single brake lever. For right-hand mounting.

SKU: 11-90-015
Stock Status: In Stock
Region: Available
(Item does not ship from the EU to Australia, Canada, or the USA.)
Delivery Status: 3-5 working days
50.42 €
Including Tax: 0 € (0%)
pcs

Get your personalised quote
Tell us what you need, and we’ll send you a personalized quote.
Request a Quote
Receive Your Quote
No obligation • We typically reply within 24 hours
Fast response
No credit card required
Free quote
The One Hand Brake for the right hand on the Trionic Veloped and Walker rollator, when installed, allows you to control the rollator's brakes with one hand. 
  • Brake lever with linear adapter that splits the single brake cable into two.
  • Both brakes (R+L) are operated with one single brake lever.
  • For right side assembly.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

Trionic Single-Hand Brake

One-hand brake that brakes the right and left brakes simultaneously.

Assembly: Trionic single-hand brake system (pictures show Right side) 1 Assembly: Trionic single-hand brake system (pictures show Right side)

1. Mount the brake lever on the gripbar (as far to the front as possible).

2. Unscrew the screws (2x 4 pcs) that attach the R & L brake cover.

3. Attach the short brake cable to the brake on the same side as the brake lever.

4. Make sure that the cable-end nipple screw is facing outwards (wheel-direction).

5. Route the longer brake cable through the frame (betw. top & down frame tube).

6. Attach the longer brake cable to the brake positioned on the opposite side of the brake lever.

7. Cut a small hole (2x) through the fabric of the basket at each rear bottom corner (see RED circles in the picture).

8. Fasten the longer brake cable to the basket with the 2 cable-ties.

9. Re-attach the 2 brake covers again, using the 2 cable-ties with a Ø5 mm hole for the 2 upper screws (R + L side).

10. Stick one of the wheel QR-axles (Ø12 mm) through the cable-tie loop, and pull the cable-tie tight around the axle (provides the correct tension in order to avoid that the cable rubs against the tire, but without the brake cable being forced out of direction).

11. The R & L side brake cables can be individually adjusted, by using either the adjuster screws positioned at the brake, or the adjuster screws attached to the linear duplicator.

12. Make sure that the parking brake blocks the wheel completely.

Centering of the brake 2 Centering of the brake

1. Unscrew the brake collar screw 3-4 turns (reached through the brake cover hole).

2. Pull the brake lever and hold it tight.

3. While holding the brake lever tight, fasten the brake collar screw again.

4. Check that the wheel spins freely, without rubbing between brake/brake hub.

If you have any questions, please do not hesitate to contact our product manager Stefan Kindberg; +46-8-522 100 52.

Customer Reviews

Bobby Huskey
Didn’t last long
This is broken already after only a couple of months of use
John Cluny
Single-Hand Brake
Brake works very well but it was not easy to fit, and the cross-cable tends to interfere with the forward sliding of the seat.
Dennis Roberts
Brake lever adapter / converter
Contact was easy, courteous and helpful.
Delivery was quick and straightforward and the part fitted as expected.

General FAQ

Relevant Guides

Search help

Also Purchased Products

Product Reviews    

  • Freedom at last.…

    My wife had major back surgery and we had a fairly nice walker for her to use before and after the surgery. It is nothing compared to the Trionic we purchased. The engineering and craftsmanship are superb and obviously of high quality. It has given h…

  • From the neighbor to your own Veloped…

    Saw it at my neighbor's house and bought it because I was impressed by every aspect. It looks great, handles well (the brakes and function)—which is difficult to grasp for someone with dementia (in our case), but otherwise the brakes work perfectly. …

  • Veloped - a great product…

    Very good advice before buying. Super quality and ingenious handling of the Veloped. Overall, a great product.…

  • Works exactly how it was designed…

    I bought the rain cover not to protect the Veloped from getting wet, rather to keep debris that could collect on it inside the garage.…

  • I am very satisfied…

    I am very satisfied with the Trionic which I use everyday, both on ordinary roads, across fields, through woods, along paths with bumps and roots and so on, and it does its work with ease.…

  • A First Class Product…

    My wife has just come out of hospital after suffering a very bad attack of vertigo. While in hospital, it was also discovered that my wife has suffered from cerebral palsy since birth. This now explains why she has such poor balance and has always re…

  • Excellent in All Ways…

    When it comes to walkers, you only need Tronic to make getting around easy and safe.

    We have two. Started with the Veloped Sport to get around the streets of Rome. Now walking is not only safer but simple. If you know Rome the streets and sidew…

  • security…

    Bought in 2021, it's the ideal companion for my safe travels, given my illness which is weakening me day by day. Looking back, I don't regret my purchase.…

  • Excellent…

    Everything we experienced with Trionic was excellent. The pre-sales advice, the ordering process, communications, delivery and (of course) the product. It's superbly engineered and easily assembled. More than that. it works, we have tried other walke…

Subscribe to our newsletter!

"> ?>