Single-Hand Brake LEFT

One-hand braking system for the Veloped/Walker, where both brakes (R+L) are operated with the left hand by a single brake lever.

SKU: 11-90-016
Stock Status: In Stock
Region: Available
(Item does not ship from the EU to Australia, Canada, or the USA.)
Delivery Status: 3-5 working days
50.42 €
Including Tax: 0 € (0%)
pcs

Get your personalised quote
Tell us what you need, and we’ll send you a personalized quote.
Request a Quote
Receive Your Quote
No obligation • We typically reply within 24 hours
Fast response
No credit card required
Free quote
The One Hand Brake for the left hand on the Trionic Veloped and Walker rollator, when installed, allows you to control the rollator's brakes with one hand. 
  • Brake lever with linear adapter that splits the single brake cable into two.
  • Both brakes (R+L) are operated with one single brake lever.
  • For left side assembly.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

Trionic Single-Hand Brake

One-hand brake that brakes the right and left brakes simultaneously.

Assembly: Trionic single-hand brake system (pictures show Right side) 1 Assembly: Trionic single-hand brake system (pictures show Right side)

1. Mount the brake lever on the gripbar (as far to the front as possible).

2. Unscrew the screws (2x 4 pcs) that attach the R & L brake cover.

3. Attach the short brake cable to the brake on the same side as the brake lever.

4. Make sure that the cable-end nipple screw is facing outwards (wheel-direction).

5. Route the longer brake cable through the frame (betw. top & down frame tube).

6. Attach the longer brake cable to the brake positioned on the opposite side of the brake lever.

7. Cut a small hole (2x) through the fabric of the basket at each rear bottom corner (see RED circles in the picture).

8. Fasten the longer brake cable to the basket with the 2 cable-ties.

9. Re-attach the 2 brake covers again, using the 2 cable-ties with a Ø5 mm hole for the 2 upper screws (R + L side).

10. Stick one of the wheel QR-axles (Ø12 mm) through the cable-tie loop, and pull the cable-tie tight around the axle (provides the correct tension in order to avoid that the cable rubs against the tire, but without the brake cable being forced out of direction).

11. The R & L side brake cables can be individually adjusted, by using either the adjuster screws positioned at the brake, or the adjuster screws attached to the linear duplicator.

12. Make sure that the parking brake blocks the wheel completely.

Centering of the brake 2 Centering of the brake

1. Unscrew the brake collar screw 3-4 turns (reached through the brake cover hole).

2. Pull the brake lever and hold it tight.

3. While holding the brake lever tight, fasten the brake collar screw again.

4. Check that the wheel spins freely, without rubbing between brake/brake hub.

If you have any questions, please do not hesitate to contact our product manager Stefan Kindberg; +46-8-522 100 52.

Customer Reviews

Monika Römer
Left single-hand brake and handling
It skews to one side when braking, especially on sloping roads.

I have trouble getting over old town pavements with kerbs.

General FAQ

Relevant Guides

Search help

Also Purchased Products

Product Reviews    

  • Hello dear Team Trionic!…

    Yes, I have received the catalog. In the meantime, I had already viewed it in PDF and therefore I ordered the Trionic Veloped because there is no comparable product in the world. The Veloped was delivered last Monday, I couldn't wait.

    I am really …

  • Worth Every Penny - Best "Walker" on the Market…

    I had been looking for a walker with larger, rubber tube tires forever it seemed. The small, hard, plastic tires on all walkers are only good for very short distances on even surfaces. Then I saw this product and I chatted and spoke to the company …

  • Fantastic…

    I am very pleased with this product. Walking on uneven surfaces is much easier.…

  • Absolutely amazing service to the needs of the mobility challenged!…

    To me, the most amazing thing about the Trionic company is that the inventor of Trionic products (the Veloped and the Walker), Stefan Kindberg, is so available to serve the customers for these remarkable devices. He personally sees to it that they ar…

  • Great Mobility Aid…

    Has allowed me to walk in a fashion that increases my stride and I am quickly getting in better physical condition. I can walk in a more upright position which doesn't irritate my back like a previous walker did. It is amazing how the climbing tire i…

  • Excellent walker…

    Lovely walker, beautifully made. Wonderful for going up and down kerbs. Try to persevere with it but need an armrest walker to take some of the weight off my legs due to MS. I was advised you didn't do these but wanted a walker I could use on roug…

  • Absolutely recommended…

    My physiotherapist said: it is like a Porsche! And I can only agree with his opinion.

    The rollator is not only elegant but also extremely reliable; I have a secure grip even on bumpy paths, even in snow it gave me good security. The brakes work pe…

  • Very satisfied - good stability…

    Since my father has the Veloped, he's been walking more and in a much safer way. It makes him feel much safer while walking.

    We are very satisfied with the Veloped and very happy we bought it. Compared to other walkers (we also had an extra rollat…

  • THANK YOU Trionic!…

    My Veloped Sport has brought me back to being outdoors and walking with much greater ease, comfort and joy! I have Hereditary Spastic Paraparesis, with progressive spasticity in my legs, which has moved me from a former very happy long-distance/marat…

Subscribe to our newsletter!

"> ?>