Single-Hand Brake RIGHT

One-hand braking system for the Veloped/Walker. Both brakes (R+L) are operated with the right hand using a single brake lever. For right-hand mounting.

SKU: 11-90-015
Stock Status: In Stock
Region: Available
(Item does not ship from the EU to Australia, Canada, or the USA.)
Delivery Status: 3-5 working days
50.42 €
Including Tax: 0 € (0%)
pcs

Get your personalised quote
Tell us what you need, and we’ll send you a personalized quote.
Request a Quote
Receive Your Quote
No obligation • We typically reply within 24 hours
Fast response
No credit card required
Free quote
The One Hand Brake for the right hand on the Trionic Veloped and Walker rollator, when installed, allows you to control the rollator's brakes with one hand. 
  • Brake lever with linear adapter that splits the single brake cable into two.
  • Both brakes (R+L) are operated with one single brake lever.
  • For right side assembly.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

Trionic Single-Hand Brake

One-hand brake that brakes the right and left brakes simultaneously.

Assembly: Trionic single-hand brake system (pictures show Right side) 1 Assembly: Trionic single-hand brake system (pictures show Right side)

1. Mount the brake lever on the gripbar (as far to the front as possible).

2. Unscrew the screws (2x 4 pcs) that attach the R & L brake cover.

3. Attach the short brake cable to the brake on the same side as the brake lever.

4. Make sure that the cable-end nipple screw is facing outwards (wheel-direction).

5. Route the longer brake cable through the frame (betw. top & down frame tube).

6. Attach the longer brake cable to the brake positioned on the opposite side of the brake lever.

7. Cut a small hole (2x) through the fabric of the basket at each rear bottom corner (see RED circles in the picture).

8. Fasten the longer brake cable to the basket with the 2 cable-ties.

9. Re-attach the 2 brake covers again, using the 2 cable-ties with a Ø5 mm hole for the 2 upper screws (R + L side).

10. Stick one of the wheel QR-axles (Ø12 mm) through the cable-tie loop, and pull the cable-tie tight around the axle (provides the correct tension in order to avoid that the cable rubs against the tire, but without the brake cable being forced out of direction).

11. The R & L side brake cables can be individually adjusted, by using either the adjuster screws positioned at the brake, or the adjuster screws attached to the linear duplicator.

12. Make sure that the parking brake blocks the wheel completely.

Centering of the brake 2 Centering of the brake

1. Unscrew the brake collar screw 3-4 turns (reached through the brake cover hole).

2. Pull the brake lever and hold it tight.

3. While holding the brake lever tight, fasten the brake collar screw again.

4. Check that the wheel spins freely, without rubbing between brake/brake hub.

If you have any questions, please do not hesitate to contact our product manager Stefan Kindberg; +46-8-522 100 52.

Customer Reviews

Bobby Huskey
Didn’t last long
This is broken already after only a couple of months of use
John Cluny
Single-Hand Brake
Brake works very well but it was not easy to fit, and the cross-cable tends to interfere with the forward sliding of the seat.
Dennis Roberts
Brake lever adapter / converter
Contact was easy, courteous and helpful.
Delivery was quick and straightforward and the part fitted as expected.

General FAQ

Relevant Guides

Search help

Also Purchased Products

Product Reviews    

  • Excellent!…

    I don't normally write reviews, but wanted to say how grateful we are to have found the Trionic Veloped. Things were looking quite bleak until we found it. My husband has a rare degenerative condition similar to MND. He is tall and wants to remain as…

  • Totally satisfied…

    The Veloped Trek is simply great. It climbs up the kerbs effortlessly and runs perfectly off-road. This is important for me because we have 2 dogs and therefore we also walk in the forest and field.

    It's super easy to use as well as to adjust the …

  • Super rollator…

    Very nice model, smooth-running and robust.
    Problem-free and fast delivery with good communication.
    Recommended.
    Thank you…

  • Love the walker, thank you…

    Thank you so very much. The Veloped walker arrived for my son yesterday. The whole experience of ordering, receiving and using this walker has been excellent. The advice we got before ordering was so important and I am grateful to Stefan for his help…

  • Excellent!…

    It has worked well after I fitted it.I love my Veloped!…

  • I have had my Trionic Veloped 14'R now……

    I have had my Trionic Veloped 14'R now for close to 6 months, at a guess.
    I have found this walker to be the best decision I made.

    Firstly I'm unsure about whether I did place a review at the time of purchase making note on the EXCELLENT client s…

  • The Veloped is a machine for living…

    The Veloped is a machine for living. I'm sure that nearly every Vellie owner will tell you that this beautiful creature gave them back a quality of life they thought they'd lost forever. It restores possibilities, confidence, freedom itself. It spark…

  • I can enjoy the outdoors again…

    I was diagnosed with Parkinson's in 2012 and my balance and mobility are now at the stage where I feel much safer walking with a rollator. I have a fleet of them! One for airport use (really), one for city sidewalk use and now 2 for outdoor use. I…

  • TRUE Enjoyment…

    I have had my new Trionic Walker for a couple of weeks and I couldn't be happier.

    I have gone on walks for miles and it has operated fabulous, no getting caught in cracks anymore, walked on gravel trails last weekend PERFECT!
    Pictures to follow, …

Subscribe to our newsletter!

"> ?>